
Rubber Gym Flooring Installation Guide: 5 Steps for Getting It Right
So you’ve chosen to go with rubber flooring for your facility, and it’s a great choice, but now comes the hard part – installing it.
Except it doesn’t have to be hard at all, because Specialized Fitness Resources has you covered with this helpful rubber gym flooring installation guide.
From preparing the space to planning the layout and installing rubber flooring correctly, this article will walk you through the key steps to help you get your floor laid with confidence.
Step 1: Choose the Right Type of Rubber Flooring
Before we get into the nitty-gritty of how to install the flooring, first make sure you’ve picked the best option for your facility’s needs. Rubber flooring comes in many shapes and sizes, but the most common types you’ll encounter look a little like this:
- Rubber rolls: Mostly used for covering larger areas with fewer visible seams.
- Rubber tiles: Practical for smaller spaces or areas requiring individual tile replacement.
- Interlocking tiles: A modular option that may allow installation without adhesive, depending on the product.
At Specialized Fitness Resources, we work with you to identify your needs, scope out the project and decide together which type of flooring will make your gym stand out among the crowd.
Step 2: Prepare the Subfloor
Before installing new rubber flooring, you first need to pay attention to what’s below. This is called the subfloor. This underlying floor needs to be clean and free of any dust, debris and grease, as well as dry, flat and stable. You’ll also want to ensure there are no cracks or uneven areas throughout your subfloor, as this can lead to issues with your rubber flooring down the road, such as raised areas and surface imperfections.
If you’re installing over concrete, it’s also important to check for moisture issues and follow the flooring manufacturer’s testing requirements.
It’s also very important to allow your rubber flooring some time to acclimate to the installation environment. However, since every type of flooring is different, always refer to your manufacturer’s instructions for exact timeframes.
Step 3: Measure and Plan Your Layout
This planning stage is vital to ensuring a smooth installation of your rubber gym flooring.
The last thing you want when you’ve prepped the subfloor and are ready to proceed with laying your new flooring is to find out you don’t have enough product.
That’s why, before you begin any installation, it’s always a good idea to measure the room, accounting for any equipment, corners or obstacles your flooring will have to maneuver around.
You’ll also want to plan out where you want any seams to fall, if applicable. Once this is done and you’re confident you have the correct amount of material, lay out your rubber tiles or unroll your rubber flooring to check the positioning before officially securing anything.
This can help avoid costly adjustments or unnecessary material waste.
Once you’re happy with the layout, if there are any size adjustments that need to be made, you can then use a sharp utility knife and straightedge to complete accurate cuts and ensure your product fits properly into the desired space.
Remember, a little extra time to plan can help avoid unnecessary waste, uneven seams and installation mistakes.
Step 4: Install Your Rubber Flooring
There isn’t necessarily a one-size-fits-all approach that you can take when installing your rubber gym flooring. That’s because each product needs to be handled a little differently.
So let’s break down how each of the flooring types outlined earlier can be installed once you’re ready to do so:
Rubber rolls: Position the rolls according to the planned layout, align seams carefully and secure them using the installation method and adhesive specified for that product.
Rubber tiles: Lay tiles in the recommended pattern, ensuring they fit together evenly without gaps or raised edges. Secure them using the installation method and/or adhesive specified for that product.
Interlocking tiles: Connect the edges according to the product instructions, checking alignment as you work to ensure a seamless fit.
Depending on which rubber flooring you choose, some options will require the use of adhesive, while other systems, such as certain interlocking tiles, can be installed without it. The correct method depends on the product, subfloor and intended use, so always follow the manufacturer’s specific installation instructions.
Step 5: Check the Finished Floor
So, you’ve installed the rubber flooring; now what? It’s time to do a thorough inspection to ensure the area is properly installed and ready for use. Here’s a simple checklist of what to look for following installation:
- Inspect seams and edges for gaps, unevenness or movement.
- Make sure transitions and doorways are properly finished.
- Remove installation debris and clean the surface using an appropriate product.
- Allow any adhesive to cure fully before introducing heavy equipment or foot traffic, following the manufacturer’s instructions.
These final checks not only help prevent problems once the gym is in regular use but also ensure that the final product looks the part as well.
A Few Best Practices for a Successful Installation
Laying flooring isn’t a quick job to get checked off your to-do list. It requires precision and careful preparation to ensure the flooring looks good and functions optimally.
When you’re installing your rubber flooring, always try to avoid rushing subfloor preparation, skipping acclimation, making cuts before testing the layout, using the wrong adhesive or assuming every rubber flooring product installs the same way.
If you’re unsure about any part of the process, always refer to the manufacturer’s installation instructions before proceeding.
Find the Right Rubber Gym Flooring With Specialized Fitness Resources
If you’re unsure of the best installation preparation and methods for your specific flooring, then getting in touch with professionals like those at Specialized Fitness Resources can help save you time and money.
We can work with you to provide proper instructions and guidance so that your flooring is installed correctly from the start. If you’re ready to re-floor your gym, then connect with us and let us help you get your flooring ready for action.
